Load cell used to measure dyno absorber torque. The load cell must be installed on ball joints to be only pulled or compressed.
- Material: Chromium alloy steel 40Cr
- Connection wire: Shielded 2m long
- Class: C2
- Sensitivity: 2.0 ± 0.05mV / V
- Temperature coefficient: ± 0.003≤% F.S / ℃
- Nonlinearity: ± 0.03≤% F.S
- Hysteresis: ± 0.03≤% F.S
- Repeatability: ± 0.03≤% F.S
- Creep: ± 0.03≤% F.S / 30min
- Zero output: ± 1≤% F.S
- Zero temperature coefficient: ± 0.003≤% F.S / ℃
- Working temperature range: -20 ~ 80℃
- Input resistance: 350 ± 20Ω
- Output resistance: 350 ± 5Ω
- Safe overload: 150% F.S
- Insulation resistance: ≥2000MΩ
- Recommended excitation voltage: 5-15V
| Range | A | B [mm] | C [mm] | D [mm] |
| 20kg, 50kg | M8x1.25 | 12.7 | 50.8 | 63.5 |
| 100kg, 200kg | M12x1.75 | 19 | 50.8 | 76.2 |
| 500kg | M12x1.75 | 25.4 | 50.8 | 76.2 |
| 1T, 2T | M16x2.0 | 25.4 | 50.8 | 76.2 |
| Function | Color | LCA1 | DC2L | DC2 |
| Excitation + | Red | V+ | EXC+ | EXC+ |
| Excitation – | Black | V- | EXC- | EXC- |
| Signal + | Green | S+ | SIG+ | SIG+ |
| Signal – | Gray | S- | SIG- | SIG- |
| Shield | Yellow | GND | EXC- or PE ground |
SHLD |
